flange

常見例句

• Both flange and web exhibited satisfactory elongation characteristics ( i . e . 28 % ).
  翼緣和腹板都有令人滿意的延伸率 ( 即28% ).
• Three structures have exhibited cracking at the ends of flange gusset plates.
  已有三個結構在翼緣節點板端部出現了裂紋.
• Small rectangular backup bars were used to fabricate the web - bottom flange connection.
  在腹板與下翼緣的施焊中使用小矩形擋板.
• These include gusset plates welded to the flange.
  這些包括焊接到翼緣上的節點板.
• For flange size backflow preventers installed vertically ( flow down ), a fabricated air gap is recommended.
  對于 垂直安裝 的法蘭通徑防回流閥, 則建議采用預制氣隙.
• It's ideal equipment for bend angle iron flange.
  是制作角鐵法蘭、型材滾圓彎曲的理想設備.
• Please give clear indication of flange, material and operating pressure if you need other standard.
  當需要其他標準法蘭 、 材質或操作壓力時請在訂貨時注明.
• Flange hole inside the tube must be chamfered hole welding.
  法蘭內孔管件內孔必須倒角焊接.
• Retighten all flange bolts in a star pattern in order to extrude rubber sleeve flange material.
  為了將橡膠套管法蘭擠出來,需要按照星形模式重新緊固所有法蘭螺栓.
• Tighten leaf spring press until bushing flange bottoms solidly against leaf spring eye.
  上緊葉片彈簧加壓機直到襯套凸緣的底部扎實地扺住葉片彈簧的孔眼.
• Engages in the production of die mould material, large forging, and chrome steel flange.
  公司從一九九六年建立以來,從各大鋼廠吸取技術, 引進各大型鍛打設備及煉鋼技術.
• The open end of the pipe or equipment is sealed with a blind flange.
  管道或設備的敞開端用盲法蘭封堵.
• Flange gaskets are not interchangeable with other mechanical pipe couplings or flange gaskets.
  法蘭墊圈與其它機械管道連接器或法蘭墊圈互換.
• Produced products with all kinds of mold, screw, Shaft, flange and various mechanical parts.
  公司生產產品有各類模具 、 絲杠 、 軸類 、 法蘭及各種機械部件.
• A great variety of flange are applied to industry such as machinery, petrochemical industry etc.
  法蘭類件種類繁多,廣泛地應用于機械、石油 、 化工等行業,產量較大,是關鍵性部件.
• Insulating joint which is different from insulating flange achieve connection through welding ( appendix A ) .
  與絕緣法蘭不同的是,絕緣接頭的 左法蘭 和勾圈是通過焊接實現連接的.
• Mating flange ID must match sleeve ID.
  配套法蘭內徑必須與套管內徑匹配.
• Flange joint system, the location of high stress level geometry discontinuity.
  法蘭接頭系統中應力水平較高的位置在幾何形狀不連續處.
• The wind power flange is the important part in electric by wind.
  風力發電塔筒法蘭是發展風力發電的重要零部件.
• Seat Face: Negates need for flange gaskets.
  閥座表面: 不需要使用閥蘭墊圈.
• Different flange form, requires the use of gaskets are also different.
  不銹鋼法蘭形式不同, 要求使用的墊片也不同.
• Agitator mounting flange can be fixed on the vessel flange with the corresponding bolt.
  凸緣爬升的鼓吹者能用相應的螺栓被固定在艦船凸緣上.
• Uses the thread or the flange capillary vessel joint.
  采用螺紋或法蘭毛細管聯接.
• Our main steel gate valve , globe valve , check valve steel flange , pipeline strainer and so on.
  各種材質閘閥、截止閥 、 止回閥 、 球閥 、 法蘭及過濾器等.
• Electric air heaters emersion heaters , heater tubes after burners, flange heaters.
  電子空氣加熱器,復現加熱器, 燃燒,加熱管, 滾邊加熱器.
• SKM STIEGELMEIER GMBH deals in Ball bearings , Swivel rollers as well as with Wheel flange wheels.
  請您訪問我們的主頁,垂詢當前的信息和服務.
• Replacement sleeves are made with one flange end slightly softer than the other.
  用來更換的套管其一端的法蘭比另一端稍微柔軟一些.
• It excels in heat resistance and sealing ability and is easy to adjust to flange.
  由于其具有優良的耐熱性,密封性,所以易帖附在排氣管連接槽處.
• Remove the bottom flange cover.
  拆卸底部法蘭蓋.
• Every lens has a mounting flange with which it is attached to the camera body.
  每個透鏡都有一個安裝凸緣,依靠它才能把透鏡安裝到相機上.
• Remove the all of urethane from all pinchweld flanges.
  由夾緊焊接凸緣去除所有尿烷.
• The gripper tube and the annular flange are used to clamp the saw blade.
  所述的卡管和夾緊套筒的環形凸緣作用來夾緊鋸片.
• Tighten leaf spring press until bushing flange bottoms solidly against leaf spring eye.
  上緊葉片彈簧加壓機直到襯套凸緣的底部扎實地扺住葉片彈簧的孔眼.
• Closure flanges may be mechanically seamed or welded in place.
  封閉裝置凸緣可用機械方法或焊接方法洽當接合.
• Force the seal onto door flangContinue rearward until it is seated on flange.
  用力將密封壓到車門凸緣上,繼續向后壓直至它固定到凸緣上.
• There is only one flat area profile on its flanges and it's on one side only.
  在它的法蘭凸緣上只有一個平面區域,且只有一邊.
• Firmly press downward to seat seal on flange.
  穩固地向下壓將座椅密封壓入凸緣中.
• Lode parameters are used to analyze the stress and the strain of the flange in calendering.
  應用羅代參數對壓延工藝中的凸緣部分進行應力和應變分析.
• Note: R is the distance between the flange fitting surface and the shaft shoulder.
  注: R為凸緣配合面至軸伸肩的距離.
• Agitator mounting flange can be fixed on the vessel flange with the corresponding bolt.
  凸緣爬升的鼓吹者能用相應的螺栓被固定在艦船凸緣上.
• There are two flat area profile on both flanges.
  兩個法蘭凸緣都有平面區域.
• R indicates the distance from fitting face of flange to axle shoulder.
  為凸緣配合面至軸伸肩的距離.
• Position weatherstrip on flange aligning notches in each corner.
  將防水飾條安放在與每個角落刻痕對齊的凸緣上.
• Insert the cord into the window opening flange channel in the weatherstrip seal.
  把繩索插入到防水飾條密封件處的窗戶開口凸緣溝槽.
• Adjust windshield glass position until it is aligned with the flanges and adhesive.
  調整擋風玻璃位置直至與凸緣和粘結劑對準.
• Slowly pull seal away from flange around edge of glass openinRemove it from vehicle.
  沿著玻璃開口邊的凸緣,慢慢地拉去封條.將其車輛上拆去.
• Inspect and repair the windshield opening and pinchweld flanges.
  檢查并修理擋風玻璃開口與夾緊焊接凸緣.
• Remove cover and clean flange and reseal.
  拆卸車軸護罩,清潔凸緣并重新密封.
返回 flange