gas holdup

基本解釋

Examples indicate that application of gas holdup data is beneficial for improving the precision of gas producing profile interpretation.
實例表明，應用持氣率資料有利于提高產氣剖面解釋的準確性。
During the operation, the gas holdup and liquid movement velocity could be regulated and controlled using the models to keep the reactor in high-efficiency and steady state.
在實際運行中，通過所建模型對反應器中的氣含率和液體運動速率進行有效調控，可實現反應器的高效穩定運行。
Optical fiber sensor has been applied in gas holdup measurement of production profile, and has a favorable prospect in permanent temperature monitoring at all depth points in the well.
光纖傳感器被用于產出剖面持氣率測量，還在永久監測全井各深度點溫度方面顯示出應用前景；

氣含率
The mathenatic model of gas holdup is constructed,and the parameters of the models of different rectors with different geometry are estimated,based on the experimental data.
建立了氣含率的數學模型,并將試驗數據擬合,得到不同結構反應器的模型參數。
持氣率
The gas holdup is an important parameter for idicating the mixing state, however, in the case of the same gas holdup, the cubage of the air bubble is different, and the mixing state is different.
持氣率是衡量混合狀態的一個重要參數,但持氣率相同的條件下,由于氣泡的大小不同,氣液混合狀態也不同。
環境科學技術
氣含率
The results show two-fluid model and a standardκ-εturbulence model are applicable to the simulation of aeration tank. The liquid velocities and gas holdup distribution in the different radial positions were obtained in the simulations.
結果表明:采用雙流體模型和標準k-ε模型可很好的模擬曝氣池內的兩相流的流體力學特性;模擬獲得了中心進氣式和偏心進氣式曝氣池內的液速、氣含率分布等。
能源科學技術
氣體停滯