hydration heat

基本解釋

The early cracking of concrete is usually caused by dry shrinkage, autogenous shrinkage of cement hydration and thermal-strain by hydration heat of cement.
混凝土的早期開裂主要是由于混凝土失水所產生的干燥收縮、水泥水化所產生的混凝土自收縮以及水泥水化熱所產生的溫度應變所引起。
The rate of hydration heat evolution and hydration heat of the PC-CS-A system were tested, and the influence of the composition on the heat of the hydration were analyzed.
測試了PC-CS-A 復合體系水泥的水化放熱量及水化放熱速率，分析了組成對水化放熱行為的影響。
According to the test results of 15 specimens of expansive concrete filled steel tube, study the hydration heat, self-stress and the limit bearing capacity of expansive concrete filled steel tube.
依據15個鋼管膨脹混凝土試件的試驗情況，研究了鋼管膨脹混凝土的水化熱，自應力及破壞荷載。

溫度應力
Temperature field & thermal stress of hydration heat in massive pile-cap was simulated and studied based on thermal analysis module of ANSYS,a finite element soft. The simulation result of temperature in the concrete is accord to the monitoring data.
采用ANSYS有限元軟件熱分析模塊對大體積承臺水化過程中的溫度場和溫度應力進行了模擬研究,混凝土中心溫度變化的模擬結果與實測數據反映一致;此外,溫度應力最大值出現在基礎底部,且小于混凝土的抗拉應力,不會出現溫度裂縫,這也與同一配比的實驗結果相符。
化學
水合熱