limit load

基本解釋

The limit load of a defective cylinder is a very important input in a structural integrity assessment of a pressure vessel or pipe using R6 type procedure.
在使用R6方法的壓力容器和管道結構完整性評估過程中，含缺陷圓筒的極限載荷是一個非常重要的輸入?yún)⒘俊?/li>
Analysis and comparison between the finite element analysis and experiment results for stress intensity factor, limit load, and flexibility factor were performed.
從應力系數(shù)、極限載荷和柔度系數(shù)三個方面對有限元計算結果和試驗結果進行對比分析。
The final test occurred Apr. 21 when the wing and trailing edges were subjected to their limit load of around 2.5g, the highest loads expected to be seen in service.
根據(jù)4月21最終試驗的結果，機翼和后緣的承受的極限負荷為2.5g左右，而實際最高負荷只能在實際服役的時候才能知道。
www.etiri.com.cn

To pass muster with the Federal Aviation Administration and other certification bodies, wings have to sustain at least 150% of the load limit without rupturing.
ECONOMIST: Business travel
Because of the 20-mile limit, most of the Mexican trucks checked are short-hop rigs that pick up a load on the Mexican side and bring it across for an American rig to take onwards.
ECONOMIST: NAFTA

極限荷載
極限承載力
極限載荷
Systematic nonlinear analysis is carried out on fuel gas pipelines with corrosion defects by means of elastic-plastic finite element analysis method,effects of corrosion length,corrosion depth and corrosion width on limit load are also analyzed.
利用有限元彈塑性分析方法,對含腐蝕缺陷的燃氣管道進行了非線性分析,研究了腐蝕缺陷的長度、寬度和深度對燃氣管道極限載荷的影響。
界限荷載

極限載荷
Loading status of tubing in oilfields was mastered by doing lots of tubing load tests and analyses. And then the theoretical model about the limit load and the vibration of tubing has been constructed.
通過大量的油管載荷測試分析,掌握了油管工作載荷情況,在此基礎上,建立油管工作時極限載荷與振動情況的理論模型。
極限荷載
Perturbation theory is used to get approximate solution. Plastic limit load of viscoplastic thick-walled cylinder and spherical shell subjected to internal pressure is investigated using the strain gradient plasticity theory.
基于應變梯度塑性理論,求得了內壓作用下厚壁圓筒和球殼的極限荷載的分析解,經(jīng)典塑性解是當前解的特例。
物理學
極限載荷
極限荷載
極限負荷
極限負載