pinion

常見例句

• Why don't you try tightening the pinion nut first?
  你為什么不先扭緊小齒輪的螺帽?
• He is held with his arms pinion together behind his back.
  他被捉住反剪著雙臂.
• The two differential - pinion gears mesh with these two side gears.
  兩個行星齒輪與這兩個半軸齒輪相嚙合.
• He is held with his arms pinion together behind his back.
  他被捉住反剪著雙臂.
• The bird a broken pinion never soars so high again, but its song is sweeter.
  折翼的鳥永遠不能振翅高飛, 但卻可以唱出更美妙的歌.
• Unique twin guide bar feature absorbs rack and pinion load and ensures optimum teeth engagement.
  獨特的雙導桿具有吸收齒條和齒輪負載的特點,確保齒輪之間能夠優化嚙合.
• Drive pinion to stop collar clearance shall be controlled to OEM specifications.
  驅動器小齒輪到止推卡環的縫隙應控制在OEM的標準之內.
• Install the pinion mate shaft lock screw finger tight to hold shaft during differential installation.
  在差速器安裝期間,安裝小齒輪配合軸鎖螺絲,用手緊固它,以把握住軸.
• Usually, we adopt pinion drive for large mills.
  大型磨機我們通常采用邊緣驅動.
• The device can be powered electrical, pneumatic, manual, pinion rotating devices.
  本產品驅動裝置可采用電動 、 氣動 、 手動 、 傘齒輪轉動等裝置.
• Push and hold ring gear upward while not allowing the pinion gear to rotate.
  當不準許主動齒輪旋轉時,向上推環齒輪,并放牢它.
• Why don't you try tightening the pinion nut first?
  你為什么不先扭緊小齒輪的螺帽?
• Install pinion front bearing, if necessary.
  如需要,安裝小齒輪前軸承.
• Mark the propeller shaft and pinion yoke, or pinion flange, for installation reference.
  在傳動軸和傳動軸軸軛 、 或小齒輪軸軛上作標記, 作安裝的參考標志.
• Vendor Shirley Pinion displays her wares in Dade County, Ga.
  喬治亞州戴德縣的賣主在展示她的貨物.
• The power enters the differential through the drive pinion on the end of the propeller shaft.
  也就是說,驅動力是從傳動軸末端的傳動齒輪輸送到差速器的.
• Check ring gear and pinion gear teeth contact pattern.
  檢查環形齒輪齒接觸印痕.
• Hold the yoke with Wrench 67 Remove the pinion shaft nut and washer.
  在小齒輪軸軸軛處拆卸萬向節扣夾螺栓.
• Remove pinion gears from differential case.
  從差速箱處拆卸主動齒輪.
• The drive pinion is meshed with a large ring gear ring gear revolves with the pinion.
  傳動齒輪與一個很大的冠狀齒輪嚙合,傳動齒輪驅動冠狀齒輪.
• Pinion by the press of men around them, they are unable to move.
  周?chē)娜巳簲D壓著他們, 使他們動彈不得.
• Worn teeth on ring gear or drive pinion gear.
  環形齒輪或驅動小齒輪上齒磨損.
• End play in drive pinion bearings.
  驅動小齒輪軸承的端隙.
• The design of drive shaft is rational in mill system of pinion drives.
  邊緣傳動式磨機系統的傳動軸的設計是合理的.
• The rack and pinion power steering gear of rotary valve has been widely the car.
  現代轎車多采用轉閥式齒輪齒條液壓動力轉向器.
• These four pinions act as bridges between the side gears.
  這四組小齒輪起到連接側方齒輪組的橋梁作用.
• Drive pinion to stop collar clearance shall be controlled to OEM specifications.
  驅動器小齒輪到止推卡環的縫隙應控制在OEM的標準之內.
• Install the pinion mate shaft lock screw finger tight to hold shaft during differential installation.
  在差速器安裝期間,安裝小齒輪配合軸鎖螺絲,用手緊固它,以把握住軸.
• Why don't you try tightening the pinion nut first?
  你為什么不先扭緊小齒輪的螺帽?
• Install pinion front bearing, if necessary.
  如需要,安裝小齒輪前軸承.
• Traction Axis with 2 motors, 2 pinions, rack and clearance electronic take up.
  牽引軸配備兩臺電機, 兩個小齒輪, 臺架以及電子設備安裝空間.
• Mark the propeller shaft and pinion yoke, or pinion flange, for installation reference.
  在傳動軸和傳動軸軸軛 、 或小齒輪軸軛上作標記, 作安裝的參考標志.
• Rotate the pinion yoke three or four times.
  旋轉小齒輪軸軛三次或四次.
• Table 1 gives the fatigue yaw moment exerted on the 4 yaw pinions.
  表1給出了施加在四個偏航小齒輪上的疲勞偏航力矩.
• Hold the yoke with Wrench 67 Remove the pinion shaft nut and washer.
  在小齒輪軸軸軛處拆卸萬向節扣夾螺栓.
• Both gear centers have pinions with only half tooth.
  兩個齒輪其中心都有一個小齒輪,這個小齒輪只有半邊有齒輪.
• If the pinion rotates about a fixed axis, the rack will move in a straight path.
  如果小齒輪繞固定軸轉動, 齒條則沿直線運動.
• Worn teeth on ring gear or drive pinion gear.
  環形齒輪或驅動小齒輪上齒磨損.
• End play in drive pinion bearings.
  驅動小齒輪軸承的端隙.
返回 pinion