plastic flow

基本解釋

So this whole portion here is plastic flow.
這部分都是塑性流動。
Yay! Now you're clearly in that plastic flow portion.
現在你能很清楚看到,塑性流動的部分。
If this part of the curve is horizontal, it means that without any increase F/A the wire will continue to get longer and longer, and we call that plastic flow.
如果這部分曲線水平，也就是意味著,沒有增加，，of，F(xiàn)，over，A，金屬絲會繼續變長,我們稱之為塑性流動。

Inside the plastic case is a non-toxic aluminum powder, mixed in with some plastic beads to keep the powder flow smooth and consistent.
FORBES: How Does An Etch A Sketch Work, Anyway?
So Parks borrowed a tool common in the welding of plastic components, which is to gently agitate the hopper so that particles flow like water into a metering chamber.
FORBES: The Impossible Made Possible

塑性流動
An adaptive EFG-FE coupling method based on the rigid-visco plastic flow theory was proposed. Key techniques and algorithms in the numerical analysis were developed.
在現有耦合方法的基礎上,根據工件變形情況實現有限元與無網格計算區域的動態轉換與耦合,提出基于剛(粘)塑性流動理論的自適應耦合無網格-有限元方法,發展了數值模擬中的關鍵技術與算法。
土木建筑工程
塑性流動
The results show that liquefied sand-gravel specimens reloading behavior is distinctly different from those without dynamic loading. The reloading stress-strain curve is composed of three parts approximately, which is stiffness-recovering part, stiffness-stabilising part and plastic flow part.
結果表明：飽和砂礫料液化后靜力再加載時其應力～應變關系與未經振動荷載作用的試樣明顯不同，可分為三個階段：模量恢復段、模量穩定段和塑性流動變形階段。
塑性流
塑性憐

塑料流動
Plastic flow in thermal-stress field is simulated by ANSYS software.
采用ANSYS軟件對溫度壓力耦合場下塑料流動進行了仿真。
塑性憐

塑流
With respect to the anti-slide resistance measures of embankment on soft clay ground, loading berm method and decrease the slope of the embankment are compared using plastic flow theory.
針對軟基堤壩的抗滑穩定措施，應用塑流理論分析、比較了反壓平臺和放緩邊坡的穩定效果。
地球科學
塑性流
塑性流動