residual error

基本解釋

This algorithm improves convergence speed and reduces residual error by increasing small the quantity of computation.
該算法通過增加很少的計算量不僅提高了收斂速度而且獲得更小的剩余誤差。
The simulation results show that the new algorithm has better performance, less steady residual error and lower calculation complexity than conditional ones.
仿真結果表明，新的算法比傳統的算法有好的性能和小的穩態剩余誤差，并且大大減少了計算復雜度。
Computer simulation shows that the improved algorithm has better convergence performance than the conventional algorithm. It can speed up convergence rate and decrease state residual error.
經計算機仿真表明，新算法與原算法相比，收斂性能有所改善，收斂速度加快，穩態剩余誤差減小。

剩余誤差
CMA is used to achieve an original convergence,and MAP estimation algorithm is then used to reduce the residual error.
該算法運用CMA使均衡達到初步收斂后,改用MAP估計的方法來減小剩余誤差。
殘差
The results showed the double neural network can improve the forecasting accuracy. The validity of real-time data was demonstrated by sequence probability ratio testing method based on calculation of residual error and probability ratio.
應用序列概率比檢測方法驗證數據的正確性，通過計算預測值和測量值的殘差、概率比，可有效檢測出實時數據的異常，為測量數據的在線自動校驗提供有效手段。
殘余錯誤
The calculation process of safety code residual error probability is analyzed and the reason that numerical problems usually occur with long safety message or low bits error rate is proposed.
分析了安全碼殘余錯誤概率的計算過程,解釋了當安全消息長度較大或通信誤碼率較小時,通用浮點計算產生數值問題的原因。
殘余誤差

殘差
Then, we give a new image denoising method based residual error correction model, which improves the quality of image denoising.
進一步地，提出了基于殘差校正模型的圖像去噪方法，提高了分?jǐn)?shù)B樣條小波的圖像去噪效果。
余差
Experiments showed that the average epipolar distance and average residual error of the latter were smaller than them of the former obviously.
實驗數據表明,在對影像進行畸變校正后估計出來的基本矩陣在平均核線距離和平均余差上都明顯小于畸變校正前的。
漏檢故障
殘馀錯誤
殘留故障