tensile stress

基本解釋

The factor of safety of the geomembrane against the mobilized tensile stresses of Laogang MSW landfill of Shanghai is 2.9, is safe for the liners system.
上海老港垃圾填埋場四期襯墊系統工程的土工膜抵抗拉伸應力的安全系數為2.9，為安全。
Stress maps of 304 austenitic stainless steel sheets at tensile stresses were measured and analysed by using polycrystalline X-ray two-dimensional area detectors diffraction system.
利用多晶X射線面探測器衍射系統對304奧氏體不銹鋼板在拉伸狀態下的應力及其分布進行了檢測分析。
This paper studies the influence of both punch shape and constructivetechnological factors as well as the compressive and tensile stresses on the endurance of cold extrusion punches.
研究了凸模形狀、結構- 工藝因素、壓應力和拉應力對冷擠壓凸模耐用度的影響。

拉應力
By adopting the general-purpose non-linear finite element ABAQUS,analysis is made of post-settlement,differential settlement and tensile stress at the bottom of four pavement structures of Huaiyan expressway test sections.
采用通用非線性有限元程序ABAQUS分析了淮鹽高速公路試驗路4種路面結構的工后沉降、不均勻沉降及層底拉應力。
張應力
The existence of the tensile stress not only affects the deformation and destruction scope of the surrounding rock, but also has correlation with the crack spread.
巖石在壓應力作用下的變形破壞機理同樣與張應力作用下的裂紋萌生和貫通機制密切相關。
能源科學技術
拉應力
The research for local peening shows this method can decrease the welding residual tensile stress in the peening region.
對局部錘擊法的研究發現,局部錘擊法可以起到降低錘擊部位的焊接殘余拉應力的作用。
殘余應力
張應力
On this basis,analyzes the effects of diameter,appropriate tensile stress and the radial groove to the dynamic characteristics of saw blades.
在此基礎上,進一步分析了對鋸片動態特性影響較大的夾盤直徑、適張應力和開徑向槽等三個因素。
物理學
拉應力
張應力
拉（伸）應力