thermal stratification height

基本解釋

Obtains two kinds of quantity group based on the similitude principle i. e. the dimensionless similarity criterion and the dimensional thermal stratification height.
根據相似原理綜合各因素得到了兩種形式的綜合量：無量綱的相似準則和熱分層高度等量綱不為一的綜合量。
According to the working principle of displacement ventilation system and domestic research, this paper studies the thermal stratification height of displacement ventilation system.
本文根據置換通風系統的工作原理，結合國內外置換通風發展的實際情況，詳細研究了置換通風系統的熱力分層高度及其影響因素。
Discusses several representative equations of point source plume. Establishes calculating equations of thermal stratification height, ventilation rate and neutral level based on a two-zone model.
討論了幾個典型的羽流流量計算公式，結合一種二區自然通風模型，建立了熱分層高度、通風量和中和界高度的計算式。

熱分層高度
Those two models are considered separately. Supply air velocity, heat power, the location of inlet vent and heat source; temperature efficiency and thermal stratification height are investigation to predict the ventilation effectiveness.
在這里，對兩種模型分別考慮；首先從理論上分析得出影響房間氣流流型、溫度分布的重要影響因素：送風速度、熱源強度、送風口位置、熱源位置等；并把溫度效率和熱分層高度作為評價增益或抑制的重要指標。