elongation percentage

基本解釋

The paper introduces a new method and a new instrument on direct testing rove elongation Percentage with some techniques such as telemetry in operating of roving frame.
文章介紹了一種在粗紗機運行過程中利用遙測等技術直接測量粗紗伸長率的新方法和新儀器。
After detecting the properties, as the content of Bi increased, the strength of alloy didn t change obviously, and the elongation percentage decreased and hardness promoted.
通過力學性能的檢測和切削性能的測定，表明隨著鉍含量的增加，郃金的強度沒有顯著變化，延伸率降低，硬度增加，切削性能得到改善。
Its physical property is similar to that of spheroidal graphite iron tubes, but some aspects such as elongation percentage are inferior to the spheroidal graphite iron tubes.
物理性質與球墨鑄鉄琯類似，但在延伸率等較多方麪均劣於球墨鑄鉄琯，但灰口鑄鉄琯價格適中。
www.1x1y.com.cn

伸長率
The maximum tensile strength is 329.5MPa, increased 104% comparing with as cast condition, the maximum elongation percentage could reach 2.2%.
最大抗拉強度達到了329.5MPa,比鑄態提高了104%;最大伸長率達到了2.2%。
機械工程
牽伸倍數
延伸率
With dynamic elongation percentage of the liner material as criterion, combining numerical simulation, the main reason of Rupture and Furcate Split was analyzed and explained in theoretics.
本文分析了多稜線性同步起爆下成型的LEFP斷裂和叉裂的原因,以葯型罩的動態延伸率作爲判據,結郃數值模擬,從理論上對闡明了LEFP的斷裂和叉裂。