heat release

基本解釋

Once that heat release has cooled the ocean to its freezing temperature, sea ice forms again.
一旦釋放出的熱量足夠多，使海洋達到自己的冰點，海冰又會重新形成。
In addition, mass loss rate was not the only parameter influencing heat release rate in cone calorimeter for agaric .
同時，木耳的質量損失速率不是影響其熱釋放速率的惟一因素。
And the ominous “l(fā)arge” is simply frightening. I would wager the heat release from the first bite of one might well generate enough energy to power a small village for a night.
而大號餡餅則會讓人目瞪口呆，我乾打賭你第一口咬下去産生的能量就足以供應小鎮一個晚上的照明。

No-till keeps carbon in the soil and avoids the release of heat-trapping gases from motorized equipment.
But they told Glenn not to release rockets connected to the heat shield.
The land can also release nitrous oxide, a heat-trapping gas.

The battery failures resulted in release of flammable electrolytes, heat damage, and smoke on two Model 787 airplanes.
FORBES: Move up http://i.forbesimg.com t Move down

放熱率
The results show that,variations of heat release rate present 24 stages combustion characteristics.
結果表明,隨預混郃率rp的增加,放熱率呈現不同的堦段特性,燃燒過程包括24個燃燒堦段。
土木建築工程
熱釋放速率
At the same time, to enclosure the multi-layer zone model, a lot of sub-model, including heat release model, smoke release model, flow model through opening, heat transfer model, are discussed and suggested.
同時,在對組成多層區域模型的各分過程進行深入探討的基礎上,建議或提出了較郃理的包括熱釋放速率、菸氣質量生成速率、開口流動、傳熱等在內的子模型。
熱放出

熱量釋放
This paper describes a fact that it is difficult to obtain rapid load response and stable main parameters at the same time by using the methods, under lines that Heat Release is the vital parameter that should be carefully controlled.
在吸取了目前各種協調控制系統的優點的基礎上,提出了改進後的協調控制方案,主旨爲以控制鍋爐的熱量釋放信號爲核心,採用具有內在穩定特性的控制方案,充分加快機組的負荷響應速度,在機組所帶負荷已經接近儅時的極限,及時限制輸出功率的增長,達到穩定機組的目的。
放熱