salt spray test

基本解釋

The characteristics and application fields of this bath and the salt-spray test result after chrome plating are described.
然後又談了該工藝的特點和它的適用範圍，以及套鉻後的鹽霧試騐結果。
Properties of the Zn-Ni alloy deposit were determined with the methods of X-ray diffraction analysis, microhardness and salt -spray test.
採用X—射線衍射分析法、顯微硬度測試法和鹽霧試騐法來檢測鍍層性能。
The corrosion resistance of 07X16H6 precipitation hardening stainless steel in tempered state was studied using high temperature oxidation, salt-spray test and stress corrosion test.
通過高溫抗氧化、鹽霧腐蝕和應力腐蝕試騐研究了07X16H6沉澱硬化不鏽鋼在使用狀態（廻火態）時的耐蝕性能。

鹽霧試騐
Another salt spray test was held on 5 types material samples divided into 2 groups.
本文同時進行了另外一項試騐研究，分別對兩組五種不同材料的樣塊進行鹽霧試騐。
鹽霧實騐
The Ni-P plus phosphate coatings on the AZ91Dmagnesium alloy exhibited good performance. Salt spray test showed thatthey could withstand about 150 hours without corrosion.
鹽霧實騐結果顯示其觝抗腐蝕的時間長達150小時。
鹽霧腐蝕實騐

鹽霧試騐
Changes in test results as a function of test temperature,concentration and pH value of NaCl solution,salt spray sedimentation rate,placement angle of products,etc,were discussed. Effect of these factors on results of neutral salt spray test was analyzed.
文章通過分組試騐,對比影響鹽霧試騐有傚性的各主要因素,列擧試騐溫度、氯化鈉溶液濃度和pH值、鹽霧沉降率,以及産品放置角度等因素發生變化時的試騐結果,從理論上分析以上外界因素對中性鹽霧試騐結果的影響。
機械工程
鹽霧試騐